RaliTripp-S full kit
RaliTripp-S full kit
RaliTripp-S is a GPS based all round clock, stopwatch & trip meter. Utilising many of the functions found in it’s big brother RaliTripp but with the addition of an integrated state of the art GPS system.
Kit comprises:
- Fully functional RaliTripp-S trip computer
- Wiring loom and connector
- Aux plug to RaliTripp-S power cable for GPS use without sensor requirement
- An external/internal magnetic mount GNSS antenna
- Right angle antenna cable adapter
- Navigator’s 2 button hand remote unit
- Fixing kit
£289.95
RaliTripp-S is an easy to use, but sophisticated, GPS-based modern rally trip meter with multiple trip distance and clock/stopwatch displays shown on a 3.5” colour and touch sensitive TFT display.
The trip meter can be used in two ways:
As a standalone GPS-based trip meter, with a simple installation (i.e. just power) for use in competition and non-competition (e.g. hire/recce) vehicles
As a sensor-based trip meter, normally in competition cars, using traditional external wheel/speedo/pulse etc sensors, with manual or automatic switching between the sensors and GPS if, for example, a sensor problem arises or wheelspin is a problem.
General description:
RaliTripp-S has an internal GNSS sensor (detecting and using the American GPS, Russian GLONASS and European GALILEO global navigation satellite constellations simultaneously) that provides trip meter distances.
This GNSS sensor allows high accuracy trip meter distances and the full features of RaliTripp-S to be used even though the vehicle installation is trivial – just a power connection is needed.
However, up to 2 traditional external sensors – inductive proximity (e.g. wheel sensors) or pulse (e.g. speedo cable, electronic sensors etc.) or switch sensors (prop shafts etc) – can also be connected.
Each external sensor, as well as the internal GNSS sensor, has its own calibration value allowing the unit to be calibrated against an organiser’s trip meter calibration distance.
The sensor used to provide trip meter distances can be selected manually, but RaliTripp-S also has a unique facility that selects the best sensor to use, automatically and without user intervention.
Automatic selection can prioritise the use of the GPS sensor or the external sensors to provide trip meter distances.
Additionally, there are 3 options that determine the trip meter distance behaviour when the GPS sensor has been manually selected to provide trip meter distances and there is a “lost fix” e.g. due to entering a tunnel or a very dense wooded area.
RaliTripp-S has 8 main modes, each with a dedicated screen, targeted at a particular type of rally or for different parts of the same rally:
Road – for general road navigation, road sections between stages etc
Rally – for road rallies
Regularity – for regularity rallies or regularity sections in other rallies
Jogularity – for jogularity rallies or jogularity sections in other rallies
Stage – for stage rallies
Due Time – for seeing how early/late it is from a set due time
Speed – If required, displays mph or kph
Time – for a simple display of rally time.
There is a comprehensive set of easy to use screens to set, for example, rally time, sensor selection and their calibration values, screen features, colours etc.
The external remote switch unit minimises the need to touch RaliTripp-S during competitive sections.
RaliTripp-S cannot display average speed in any way, ensuring it can be used on all competitive events without penalty.
RaliTripp-S is supplied with:
An 8-way pluggable wiring loom, with individual coloured wires
An external/internal magnetic mount GNSS antenna to maximise satellite detection/tracking and hence distance accuracy. The antenna has a fixed 3 metre lead, but extension cables can be used to extend this.
A right angle antenna cable adapter, allowing easier installation when the antenna cable may need to come towards the side of the unit
A (pluggable) remote switch unit with a 2 metre lead, allowing most of the RaliTripp-S functionality to be operated without touching the display
Aux plug to RaliTripp-S power cable for GPS use without sensor requirement.
Mechanical description
RaliTripp-S features a polypropylene black case with carbon effect front panel having o/a dimensions of 113mm (L) x 59mm (H) x 24mm (D).
There are 2 x M4 rivnuts attached to the rear to aid panel mounting if required
Alternatively, mounting can be via velcro pads and/or a windscreen holder found on this website.
Purchase options:
RaliTripp-S kit comprises:
Fully functional RaliTripp-S trip computer
Wiring loom and connector
Aux plug to RaliTripp-S power cable for GPS use without sensor requirement
An external/internal magnetic mount GNSS antenna
Right angle antenna cable adapter
Navigator’s 2 button hand remote unit
Fixing kit
RaliTripp-S holder:
A lightweight holder for mounting either RaliClok or RaliTripp-S to variety of places and positions in the vehicle: HERE
Navigator’s remote unit:
Spare Navigator’s 2 button hand remote unit can be found on the web site.
Download RaliTripp-S user booklet in pdf form
RaliTripp-S User Booklet v3_00
Note: If the User Manual shows features not available on your unit, please contact the Basic Roamer Company for a FREE software upgrade
It’s a Navigator’s thing…